1🥞,王元清,江见鲸🎙,龚晓南🈷️,樊健生🐛,崔京浩
《建筑结构事故分析与处理》(第四版)🍀。
中国建筑工业出版社,2018.6。
2🧑🏻🔧、王元清,石永久,吴丽丽
《点支式玻璃建筑应用技术研究》。
科学出版社🏵,2009.8🛸。
3、石永久,施 刚,王元清👩🏿,陈 宏
《多高层钢框架梁柱节点-理论与设计》。
中国建筑工业出版社🍉,2014.6。
4, Beibei Li,Yuanqing Wang,Ying Zhang,Huanxin Yuan,Xinhang Zhi,Charalampos C. Baniotopoulos.
Flexural behaviour of 7A04-T6 high-strength aluminium alloy SHS and RHS beams under moment gradient.
Engineering Structures. 259(2022):114138⬅️。
5↩️、Zhongxing Wang,Yuanqing Wang🙇🏻♀️,Beibei Li😡,Ying Zhang
Experimental and numerical study on seismic behaviour of aluminium alloy frames.
Journal of Building Engineering [J]🤱,50(2022):104231🍿。
6、Yuanqing Wang , Dongdong Xu, Yidu Bu*, Xiaoling Liu, Ming Liu.
Elastic Buckling Analysis of Rectangular Longitudinally Profiled (LP) Steel Plates under Uniform Compression.
Thin-Walled Structures[J]🥞🤖,2020,157,107003🖕🏼。
7、Xiaoling Liu, Yuanqing Wang, Huiyong Ban, Ming Liu, Veljkovic M., Bijlaard F.S.K.
Flexural strength and rotation capacity of welded I-section steel beams with longitudinally profiled flanges.
Journal of Constructional Steel Research[J]🫚,2020,173,106255.
8、Wang ZX, Wang YQ, Zhang Y*, Gardner L, Ouyang Y W..
Experimental investigation and design of extruded aluminium alloy T-stubs connected by swage-locking pins.
Engineering Structures. 2019; 200. 109675
9、Yuanqing Wang,Zongyi Wang,Kang Xu,Xinxi Du🚶♂️,Yongjiu Shi
Experimental and numerical studies on the static and the dynamic behaviors of embedded cable support (ECS) glass facade system.
Engineering Structures[J]⛹🏻♂️,2019,178🐉: 521-522
10🧘🛠、Liao Xiaowei, Wang Yuanqing, Zongyi Wang,Shi YongJiu
Investigation on fatigue properties of bridge-steel butt-welded joints at low temperatures.
Engineering Failure Analysis [J],2019,105:597-609.
11、Yidu Bu, Yuanqing Wang, Yipeng Zhao
Study of stainless steel bolted extended end-plate joints under seismicloading.
Thin-Walled Structures{J}。2019👩🏽✈️,144👅:106255
12👨🏻🦽➡️、Yuelin Zhang, Yuanqing Wang
The influence of welding mechanical boundary condition on the residual stress and distortion of a stiffened-panel.
Marine Structures [J]. 2019,65: 259–270.
13、Zongyi Wang, Yuanqing Wang, Xinxi Du, Tianxiong Zhang and Yuekun Heng
Study on the Fracture Properties of the PMMA Structure for the JUNO Central Detector.
KSCE Journal of Civil Engineering [J]. 2019🧷,23(6): 2584-2597.
14、Zhongxing Wang🀄️,Yuanqing Wang🧚🏽♀️,Guixiang Zhang,Youjiu Shi
Tests and Parametric Analysis of Aluminum Alloy Bolted Joints of Different Material Types.
Construction & Building Materials,2018,185:589-599.
15😡、Yuanqing Wang, Xiaoling Liu, Huiyong Ban, Ming Liu, Yongjiu Shi and Yuyin Wang
Deformation behavior at SLS of welded I-section steel beams with longitudinally profiled flanges.
Journal of Constructional Steel Research[J]🕥,2018,146:122-134.
16、X.W. Liao, Y.Q. Wang, L.Zong
Fatigue crack propagation for Q345qD bridge steel and its butt welds at low temperatures.
Fatigue & Fracture of Engineering Materials & Structures. 2018,41(3): 675-687.
17、Zhongxing Wang,Yuanqing Wang🖤,Jeong Sojeong and Yuanwen Ouyang
Experimental Investigation and Parametric Analysis on Large-Section Aluminum Alloy Columns.
Thin-Walled Structures,2018,122:585-596.
18#️⃣、X.Y. Liu, Y. Q. Wang*, J. Xiong, H. Zhou and Y.J. Shi
Study on damage behavior of steel beam-to-column connection under inelastic cyclic loading.
Journal of Zhejiang University-SCIENCE A, 2017🦹🏻♂️,18(11):910-926.
19、Y.Q. Wang, H.X. Yuan, T.Chang, X.X. Du, M.Yu
Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions.
Thin-Walled Structures. 2017,(119):396-403.
20、WANG ZongYi, WANG YuanQing, WANG Zhe, CHEN ShaoMin, ZHANG TianXiong, WANG Jun
Design and analysis of the physical 1-ton prototype of the Jinping Neutrino Experiment.
Nuclear Instuments & Methods in Physisics Research Section A-accelerators Spectrometers Detectors and Associated Equipment [J].2017🚸,855:81-87.
21、Xiyue Liu, Yuanqing Wang,Xiong Jun and Shi Yongjiu
Investigation on the weld damage behavior of steel beam-to-column connection.
International Journal of Steel Structures. 2017,17(1)🪇:1-17.
22🧂、Zongyi Wang, Yuangqing Wang , Yuekun Heng, Xinxi Du, Zhonghua Qin
Bearing capacities of the structure and joint of JUNO central detectorr.
Periodica Polytechnica Civil Engineering [J],2016👨🦱,60(4)👨💻❓:561-572.
23🤵♀️、Y.Q.Wang, Z.X.Wang
Experimental Investigation and FE Analysis on Constitutive Relationship of High Strength Aluminum Alloy under Cyclic Loading.
Advances in Materials Science and Engineering👩🏻🚒,2016📉,(2016-9-15)📹👂:1-16.
24📮、Wang Z.Y, Wang Y.Q, Liang Y.F, Du X.X, Shi Y.J.
Bearing capacity of tempered glass panel in point supported glass facades against in-plane load.
Archives of Civil and Mechanical Engineering [J],2016,16(4):935–948.
25、Y.Q.Wang, Z.X.Wang, X.G.Hu, J.K.Han, H.J.Xing
Experimental Study and Parametric Analysis on the Stability Behavior of 7A04 High-Strength Aluminum Alloy Angle Columns under Axial Compression
Thin-Walled Structures [J]. 2016,(108)🦹♀️:305-320.
26、Y.Q.Wang, Z.X.Wang, F.X.Yin, L.Yang, Y.J.Shi, J.Yin
Experimental Study and Finite Element Analysis on the Local Buckling Behavior of Aluminium Alloy Beams under Concentrated Loads
Thin-Walled Structures [J]. 2016,(105):44-56.
27🤱🏻、Zhao Bo, Wang Yuanqing, Chen Zhihua, Shi Yongjiu
Seismic response and design method of single large span structure to random spatial ground motions.
Advances in Structural Engineering [J] 🗼,2016,19(2):372-389.
28🕶、Yuanqing Wang🫰🏽,Zongyi Wang,Yufan Liang🥏,Xinxi Du,Yongjiu Shi
Study on the stress and failure strength around the hole in point supported glass panels.
Materials and Structures [J]👷♂️,2016(49)🃏:4375–4387.
29、Zhao Bo, Wang Yuanqing, Chen Zhihua, Shi Yongjiu, Jiang Yang
Research on the random seismic response analysis for multi and large span structures to multi-support excitations.
Earthquake Engineering and Structural Dynamics. 2015🌔,14(3)☕️:527-538.
30、Yuanqing Wang,Xiyue Liu, Yun Lin and Shi Yongjiu
Experimental study on fracture toughness of high-strength construction steel and its butt weld.
Advanced Steel Construction. 2015🧑🏼💼,11(4):440-451.
31、Lili Wu👩🏿🦰,Yuanqing Wang,Maochao Yan,Yongjiu Shi and Hengqiu Zhang
Flexural behavior of in-plane bending glass structures for design method.
J. Cent. South Univ. 2015,22:3133-3140.
32🏌🏻♀️、Yang Lu👆🏻,Wang Yuanqing,Shi Yongjiu
Full-Scale Test of Two-Storey Composite Slim Floor under Pseudo-Dynamic and Pseudo-Static Loadings.
Advances in Structural Engineering. 2015,18(2)💅:173-188.
33、Lu Yang, Yuanqing Wang, Jian Guan.Yong Zhang and Yongjiu Shi
Bearing Strength of stainless steel bolted connection.
Advances in Structural Engineering. 2015😞,18(7):1151-1162.
34、H.X. Yuan, Y.Q. Wang, L.Gardner, X.X. Du , Y.J. Shi
Local-overall interactive buckling behaviour of welded stainless steel I-section columns.
Journal of Constructional Steel Research. 2015,111😌:75-87.
35、Wang Yuanqing, Zong Liang, Zhu Ruixiang, Dai Guoxin, Shi Yongjiu
Behavior of I-section steel beam welding reinforced while under load
Journal of Constructional Steel Research. 2015,106:278-288.
36、王元清, 宗 亮, 石永久, 黎红兵, 梁 爽, 完海鹰
钢结构加固技术研究进展与标准编制👫🏼。
《建筑结构学报》,2022,43(10):29-40👩🏿。
37、支新航,王元清,李贝贝,张 颖,范圣刚,欧阳元文
7075-T6 高强铝合金轴心受压构件局部稳定试验研究。
《天津大学学报》(自然科学与工程技术板),2020,55(7):745-753。
38🧑🚀、王元清,孙 洲🛄,王综轶,郑宝锋,汤月生,欧阳元文
结构有机玻璃的工程应用与研究进展😎。
《工程力学》🧜🏻♂️⚾️,2022🦶🧑🏽🎄,39(4):001-014♊️。
39、徐冬冬🆘🌉,王元清👨🏼🍳,刘晓玲,班慧勇,刘 明
纵向变厚度钢板焊接工字形截面受压短柱的局部稳定试验研究。
《建筑结构学报》,2022🈚️,43(5):13-25。
40、刘晓玲,王元清,徐冬冬🤷🏻♀️,班慧勇,刘 明
翼缘纵向变厚度焊接工字形截面钢梁整体稳定性能试验💜⛹️♀️。
《建筑结构学报》,2022🔀,43(5):1-12。
41、叶全喜👨,王元清,丁大益🔚🤑,张 枫👲🏿,林 樱
穿心板式钢管混凝土柱-钢梁栓接节点抗震性能试验研究。
《土木工程学报》💆🏿。2021😼👗,54(7)👨🏿🎨:24-33,53🖥。
42、张天雄,王元清,陈志华🍊,卜宜都,董 帅©️👩💻,何 伟
高强度不锈钢短尾环槽铆钉力学性能试验研究📯。
《工程力学》。2021🪸,38(suppl.)🙇🏽:151-157🟰。
43、黄健鸣,王元清,宗 亮,张亚伟
焊接方式对负载下加固工形截面钢梁残余变形影响的试验研究。
《工程力学》🥄。2021,38(suppl.)⚂:243-250🪚🤍。
44、徐冬冬👩🏽💼,王元清🥤,刘晓玲,班慧勇,刘 明
纵向变厚度(LP)矩形钢板弹性屈曲系数的理论分析💬😨。
《工程力学》😴,2020,37(9): 173-183。
45、张 颖,王元清✍🏿,卜宜都,王中兴👨🏽🔧,范圣刚👦🏼,谢 军
轴心受压不等边角铝构件整体稳定试验研究👜。
《天津大学学报》(自然科学与工程技术板)🔊,2020♛,53(12)🤰🏼:1236-1242。
46、廖小伟🛰,王元清🧚🏿♀️,吴剑国🥷🏽,石永久
低温环境下十字形非传力角焊缝接头的疲劳性能🧑🦲。
《浙江大学学报》(工学版)🏊🏼,2020𓀊,54(10): 1-9🙌🏿🧤。
47🧏🏽♂️、王元清🧘🏿♀️,关 阳,刘 明🍜🏟,卜宜都、刘希月、顾浩洋
建筑结构钢材及其焊缝循环微观损伤模型的韧性参数校正分析。
《工程力学》🦺,2020🤾🏽♂️🐻,37(s1): 20-31。
48、张 颖🩺👨🏻🍳,王元清,张俊光,欧阳元文
铝合金网壳结构箱型-工字型盘式节点单肢受力性能有限元分析。
《工程力学》,2020,37(s1): 130-138。
49、王元清,张 颖✖️,张俊光,欧阳元文
铝合金箱形-工字形盘式节点整体变形性能试验研究⚡️。
《天津大学学报》(自然科学与工程技术板),2020,53(5):527-534♌️。
50、王元清,顾浩洋🥖,廖小伟
钢结构角焊缝低温抗剪疲劳性能的试验研究🙎🏽♂️。
《工程力学》,2020,37(1): 73-79🍜,134🤹。